CloseHomeApplicationsComparisonNewsContact

Application Overview

EVA encapsulant film is used wherever a photovoltaic module needs its cell circuit bonded, insulated and sealed. Bouling Chemical supplies film in roll and cut-sheet formats for different lay-up methods.

The four application paths below group the same material by the way it is used: around the cell string, during panel lamination, as pre-cut sheet, and as a wider-window film for demanding lines.

Material Functions

What the cured film does inside the laminate.

  • Optical Coupling

    The refractive index of cured EVA is close to that of module glass, which reduces reflection at the cell surface and lets more light reach the junction.

  • Mechanical Bonding

    Crosslinked film adheres to glass, cells and backsheet, so the laminate behaves as one solid sheet rather than a stack of loose layers.

  • Moisture Sealing

    The cured encapsulant limits water vapour and oxygen reaching the cell surface, slowing corrosion of contacts and interconnects.

  • Electrical Insulation

    EVA is an electrical insulator; it separates the conductive circuit from the module edges and outer surfaces.

Choosing a Format

Roll film suits long runs of one module size. Cut sheet reduces changeover time when formats vary. High-performance film is chosen when the line needs a wider lamination window and tighter repeatability.

The comparison page sets the four applications side by side so you can match film format and process emphasis to your own line.

Compare applications

Start a Conversation

Scan to chat with Julie Gong on WhatsApp.