CloseHomeApplicationsComparisonNewsContact

Application Overview

An EVA film sheet is a pre-cut piece of encapsulant sized to the module lay-up. It removes the cutting step from the line and helps operators place the film accurately over the cell string.

Sheets are used where short runs, frequent format changes or manual lay-up make roll feeding less practical. The material behaves the same as roll film during lamination: it flows, wets the cells and crosslinks.

How EVA Works

The same four functions apply wherever EVA encapsulant is used.

  • Optical Coupling

    The refractive index of cured EVA is close to that of module glass, which reduces reflection at the cell surface and lets more light reach the junction.

  • Mechanical Bonding

    Crosslinked film adheres to glass, cells and backsheet, so the laminate behaves as one solid sheet rather than a stack of loose layers.

  • Moisture Sealing

    The cured encapsulant limits water vapour and oxygen reaching the cell surface, slowing corrosion of contacts and interconnects.

  • Electrical Insulation

    EVA is an electrical insulator; it separates the conductive circuit from the module edges and outer surfaces.

Sheet Format

The advantage of sheet film is control at the lay-up table. Each piece is dimensioned for the module, so the operator places it once and proceeds to vacuum. Optical transmission of at least 91% and gel content of at least 75% after cure remain the reference points for quality.

For prototypes, small series and mixed module sizes, sheets lower the setup burden while keeping the same encapsulant performance expected in volume production.

Processing Guidance

1

Match the Format

Select a sheet size that matches the glass and leaves the required edge margin.

2

Lay Up

Position the lower sheet, cell matrix and upper sheet, keeping the stack clean and flat.

3

Laminate

Run the standard vacuum and heated press cycle, then cool under pressure before trimming.

Where It Is Used

Common module formats and working conditions for this application.

  • Short Production Runs

    Batches where changing roll widths would waste time and material.

  • Prototype Modules

    R&D builds that need accurate film placement without dedicated cutting equipment.

  • Field Service Work

    Replacement laminates prepared away from a full module line.

Packaging and Delivery

How the film is protected and identified before it reaches your line.

  • Flat Packing

    Sheets are packed flat and separated to prevent blocking during storage.

  • Surface Protection

    Interleaving keeps each sheet clean until it reaches the lay-up table.

  • Size Marking

    Sheet dimensions are marked on the pack for quick identification.

Related Applications

Explore the other ways EVA encapsulant is used in module assembly.

Start a Conversation

Scan to chat with Julie Gong on WhatsApp.